Industrial filter bags, engineered for every baghouse.
Four product families, dozens of fibre and finish combinations, with every spec built around your dust profile and emissions target.
Pulse-Jet Filter Bags
Custom-sewn or welded filter bags for high-energy reverse-pulse collectors in cement, steel, power and biomass plants. Engineered for abrasive loads, high temperatures and aggressive process conditions.
- Media options
- Polyester, PPS, Meta-Aramid (Nomex), P-84 polyimide blends, ultra-microfibre (13–15 µm) surface layers, hybrid modifications
- GSM
- 350 – 750 g/m²
- Service temperature
- Up to 260 °C continuous
- Diameters
- 100 – 250 mm
- Lengths
- Up to 12 m
Reverse-Air Bag Filters
Long, large-diameter bags for low-stress, continuous reverse-air baghouses, the workhorse format for cement kilns, alumina calciners, coal boilers and steel sinter plants. Rated for 50,000+ cleaning cycles.
- Media options
- Fibreglass with PTFE / graphite / silicone finish, Polyester, P84 blends
- Service temperature
- Up to 260 °C (Fibreglass)
- Diameters
- 200 – 400 mm
- Lengths
- Up to 25 m
- Cleaning cycle life
- Rated for 50,000+ cycles
Shaker Filter Bags
Lofted needle felts designed for low-pressure mechanical-shaker systems, where cleaning energy is gentle and the priority is mechanical durability over many cycles. Common in food, fertiliser, foundry, milling and asphalt plants.
- Media options
- Lofted Polyester, Anti-static Polyester, Homopolymer Acrylic, Para-aramid blends
- Service temperature
- Up to 150 °C (per fibre)
- Applications
- Milling & grain, sawmills & MDF, fertiliser, tobacco dryers, foundry shakeout, asphalt
- Closures
- Top loop, bottom cuff, double-stitched seams
- Customisation
- Made to your existing shaker assembly, drawings welcome
PleatMax Pleated Elements
Star and oval pleated cartridge elements that pack significantly more filtration area into the same cage footprint, built around our ComPac® felt technology. The right call when a baghouse needs a capacity upgrade without a structural rebuild.
- Geometries
- Star-pleated, Oval-pleated, custom pitch
- Media
- ComPac® needle felt and spunbond options with ultra-microfibre surface layers
- Use case
- Retrofit capacity upgrades, footprint-constrained baghouses, high SCA applications
- Service temperature
- Up to 200 °C depending on media
- Benefits
- 2–3× filtration area in same cage, lower air-to-cloth ratio, longer service life
The right fibre for your dust.
Polyester
General duty, ≤150 °C continuous. Hydrolysis-resistant variants available.
PPS (Ryton)
Acid and alkali resistant. ≤190 °C continuous. Coal boilers, waste incineration.
Meta-Aramid
Nomex-class. ≤204 °C continuous. Asphalt, foundry, cement raw mills.
P-84 Polyimide
Trilobal cross-section, premium efficiency. ≤240 °C. Cement kilns, waste-to-energy.
Ultra-microfibres
13–15 µm fibres in the surface layer. Captures fine dust at ≤5 mg/Nm³ while the air keeps flowing: our answer to PTFE membranes.
Fibreglass
Up to 260 °C. The reverse-air standard. PTFE / graphite / silicone finish options.
Not sure which media fits?
Send us the temperature, chemistry, moisture, particle size and emissions target. We'll come back with a specification, usually within two working days.